◆Rolling Conditions：

　　Material: stainless steel
　　 Feedstock thickness:1.0mm Feedstock width：400mm
　　 Finished product thickness：0.2mm Finished product width：400mm
　　 Rolling speed：V≤100m/min
　　 Rolling pressure：180T

◆Device Configuration：

　　Main engine：Ф110/Ф360×500 4-Roller Cold Rolling Mill
　　 (1)Screw down gear：
　　 1、Electric press motor YZ 5.5KW×2 sets：
　　 2、Can be pressed at the same time, lifted, or lifted separately, pressed down；
　　 3、The worm gear is pressed into a secondary enveloping toroidal worm gear with a center distance of 240mm and a module of 12mm.
　　 4、Depression screw is B120×6, material is 40Cr;
　　 5、Worm gear box material is ZG270-500。

　　(2)Rack Mounting：

　　1、Two plates of close housing post(sectional dimension of the vertical shaft 200×260mm)
　　 2、With imported pressure plate
　　 3、With roller device；
　　 4、The upper roll is spring balanced

　　(3)Roller Device：

　　1、Working roll diameter × roll surface width Ф110×500mm Material：9Cr2Mo Antifriction bearings are adopted
　　 2、Supporting roll diameter × roll surface width Ф360×500mm Material：9Cr2Mo FC4058192 is adopted as the bearing
　　 3、Lubricating system：Dry oil lubrication
　　 4、Roll changing mode：Manual roll change(matched with roll changing track)